Manufacturing and assembly of IWS support rib and lower bracket for ITER vacuum vessel

10th Asia Plasma and Fusion Association Conference

Laad, R.^1 ; Sarvaiya, Y.^1 ; Pathak, H.A.^1 ; Raval, J.R.^2 ; Choi, C.H.^2

TTER-India, TPR, A-29, Electronic Estate, Gandhinagar

382016, India^1

ITER Organization, Route de Vinon-sur-Verdon-CS 90046, St Paul-lez-Durance Cedex

13067, France^2

关键词: Full penetration;    In-wall shielding;    Independent components;    ITER vacuum vessels;    Selection criteria;    Supporting structure;    Toroidal magnetic fields;    Waterjet cutting;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/823/1/012050/pdf
DOI  :  10.1088/1742-6596/823/1/012050

来源: IOP

【 摘 要 】

ITER Vacuum Vessel (VV) is made of double walls connected by ribs structure and flexible housings. Space between these walls is filled up with In Wall Shielding (IWS) blocks to (1) shield neutrons streaming out of plasma and (2) reduce toroidal magnetic field ripple. These blocks will be connected to the VV through a supporting structure of Support Rib (SR) and Lower Bracket (LB) assembly. SR and LB are two independent components manufactured from SS 316L(N)-IG, Total 1584 support ribs and 3168 lower bracket of different sizes and shapes will be manufactured for the IWS. Two lower brackets will be welded with one support rib to make an assembly. The welding between SR and LB is a full penetration welding. Total 1584 assemblies of different sizes and shapes will be manufactured. Sufficient experience gained from manufacturing and testing of mock ups, final manufacturing of IWS support rib and lower bracket has been started at the site of IWS manufacturer M/s. Avasarala Technologies Limited (ATL). This paper will describe, optimization of water jet cutting speed on IWS material, selection criteria for K type weld joint, unique features of fixture of assembly, manufacturing of Mock ups, and welding processes with NDTs.