Optimization of Geometric Parameters of the Cyclone Apparatus Based on its Numerical Modeling

International Conference on Information Technologies in Business and Industry 2016

计算机科学;经济学;工业技术

Biryuk, V.V.^1 ; Gorshkalev, A.A.^1 ; Tsapkova, A.B.^1 ; Shimanov, A.A.^1 ; Blagin, E.V.^1

Samara National Research University, 34, Moskovskoye shosse, Samara

443086, Russia^1

关键词: 3D models;    Cleaning degree;    Clearing process;    Flow channels;    FLUENT software;    Solid particles;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/803/1/012022/pdf
DOI  :  10.1088/1742-6596/803/1/012022

来源: IOP

【 摘 要 】

This article deals with a cyclone cleaner which separates solid particles from the gas. The influence of the input duct angle and the relation of the conical part of the apparatus to a cylindrical one on the cleaning degree were investigated. 3-d models of the flow channel of the opposite-flow cyclone with input duct angles varied from 0 to 40 conical and cylindrical parts relation from 2:3 to 4:1 were considered. Numerical modelling of a soot clearing process in the opposite-flow cyclone was carried out in the ANSYS Fluent software. The results of 25 different models are presented.