Rheological Characterisation of the Flow Behaviour of Wood Plastic Composites in Consideration of Different Volume Fractions of Wood

2nd International Conference on Rheology and Modeling of Materials

Laufer, N.^1 ; Hansmann, H.^1,2 ; Koch, M.^3

Institute for Polymer Technologies E. V., Wismar, Germany^1

Department of Mechanical Engineering, Hochschule Wismar University of Applied Sciences, Technology, Business and Design, Wismar, Germany^2

Department of Plastics Technologies, Ilmenau University of Technology, Ilmenau, Germany^3

关键词: Flow function;    High-pressure capillaries;    Interaction effect;    Interaction exponents;    Wood plastic composite;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/790/1/012017/pdf
DOI  :  10.1088/1742-6596/790/1/012017

来源: IOP

【 摘 要 】

In this study, the rheological properties of wood plastic composites (WPC) with different polymeric matrices (LDPE, low-density polyethylene and PP, polypropylene) and with different types of wood filler (hardwood flour and softwood flour) have been investigated by means of high pressure capillary rheometry. The volume fraction of wood was varied between 0 and 60 %. The shear thinning behaviour of the WPC melts can be well described by the Ostwald - de Waele power law relationship. The flow consistency index K of the power law shows a good correlation with the volume fraction of wood. Interparticular interaction effects of wood particles can be mathematically taken into account by implementation of an interaction exponent (defined as the ratio between flow exponent of WPC and flow exponent of polymeric matrix). The interaction exponent shows a good correlation with the flow consistency index. On the basis of these relationships the concept of shear-stress-equivalent inner shear rate has been modified. Thus, the flow behaviour of the investigated wood filled polymer melts could be well described mathematically by the modified concept of shear-stress-equivalent inner shear rate. On this basis, the shear thinning behaviour of WPC can now be estimated with good accuracy, taking into account the volume fraction of wood.