Effect of the layer of anodized 7075-T6 aluminium corrosion properties

2nd Colombian Congress of Electrochemistry; 2nd Symposium on Nanoscience and Nanotechnology

物理学;化学

Montoya, Z.R.D.^1 ; Vera, L.E.^1 ; Pineda, T.Y.^1 ; Cedeño, M.L.^1

Universidad Pedagógica y Tecnológica de Colombia, Tunja, Colombia^1

关键词: Acidic electrolytes;    Corrosion property;    Electrochemical spectroscopy;    Electrolytic process;    Protective layers;    Structural component;    Tafel polarization curves;    Thickness of films;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/786/1/012032/pdf
DOI  :  10.1088/1742-6596/786/1/012032

来源: IOP

【 摘 要 】

Aluminium alloys are widely used in various sectors of industry. The 7075-T6 alloy corresponding to an Al-Zn T6, is mostly used as structural component in the aviation industry, due to the good relationship between weight and mechanical properties. However, the negative point of this alloys is the resistance to corrosion, which is why they need to be coated with an anodic film. Different surface treatments, such as anodizing, are used to improve corrosion resistance. Anodizing is an electrolytic process by which a protective layer on aluminium known as "alumina" is formed, this is formed by the passage of an electric current in an acidic electrolyte. This investigation presents a study of the effect of the thickness of layers of alumina deposited by anodized method, in the corrosion resistance of 7075-T6 aluminium. This study was performed by using in a solution of tartaric acid - sulfuric acid and an inorganic salt. To evaluate the influence alumina layer thickness on the corrosion properties some tests were carried out by using the electrochemical spectroscopy impedances (EIS) technique and Tafel polarization curves. It was found that the grown of the thickness of film favourably influences in the corrosion resistance.