Photoelasticity and DIC as optical techniques for monitoring masonry specimens under mechanical loads

23rd AIVELA (the Italian Association of Laser Velocimetry and non invasive diagnostics) Annual Meeting 2015

Colla, C.^1 ; Gabrielli, E.^1

DICAM Dept., School of Engineering and Architecture, University of Bologna, v.le Risorgimento 2, Bologna

40136, Italy^1

关键词: Cultural heritages;    Field visualization;    Masonry structures;    Measuring device;    Mechanical loads;    Mechanical parameters;    Optical monitoring;    Optical technique;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/778/1/012003/pdf
DOI  :  10.1088/1742-6596/778/1/012003

来源: IOP

【 摘 要 】

To evaluate the complex behaviour of masonry structures under mechanical loads, numerical models are developed and continuously implemented at diverse scales, whilst, from an experimental viewpoint, laboratory standard mechanical tests are usually carried out by instrumenting the specimens via traditional measuring devices. Extracted values collected in the few points where the tools were installed are assumed to represent the behaviour of the whole specimen but this may be quite optimistic or approximate. Optical monitoring techniques may help in overcoming some of these limitations by providing full-field visualization of mechanical parameters. Photoelasticity and the more recent DIC, employed to monitor masonry columns during compression tests are here presented and a lab case study is compared listing procedures, data acquisitions, advantages and limitations. It is shown that the information recorded by traditional measuring tools must be considered limited to the specific instrumented points. Instead, DIC in particular among the optical techniques, is proving both a very precise global and local picture of the masonry performance, opening new horizons towards a deeper knowledge of this complex construction material. The applicability of an innovative DIC procedure to cultural heritage constructions is also discussed.