Experimental testing of axial induction based control strategies for wake control and wind farm optimization

The Science of Making Torque from Wind

Bartl, J.^1 ; Sætran, L.^1

Fluid Mechanics Group, Department of Energy and Process Engineering, Norwegian University of Science and Technology, Kolbjørn Hejes v. 2, Trondheim

7491, Norway^1

关键词: Array efficiency;    Control strategies;    Experimental testing;    Radial distributions;    Separation distances;    State of the art;    Tip speed ratio;    Wake interactions;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/753/3/032035/pdf
DOI  :  10.1088/1742-6596/753/3/032035

来源: IOP

【 摘 要 】

In state-of-the-art wind farms each turbine is controlled individually aiming for optimum turbine power not considering wake effects on downstream turbines. Wind farm control concepts aim for optimizing the overall power output of the farm taking wake interactions between the individual turbines into account. This experimental wind tunnel study investigates axial induction based control concepts. It is examined how the total array efficiency of two in-line model turbines is affected when the upstream turbine's tip speed ratio (λcontrol) or blade pitch angle (β-control) is modified. The focus is particularly directed on how the wake flow behind the upstream rotor is affected when its axial induction is reduced in order to leave more kinetic energy in the wake to be recovered by a downstream turbine. It is shown that the radial distribution of kinetic energy in the wake area can be controlled by modifying the upstream turbine's tip speed ratio. By pitching out the upstream turbine's blades, however, the available kinetic energy in the wake is increased at an equal rate over the entire blade span. Furthermore, the total array efficiency of the two turbine setup is mapped depending on the upstream turbines tip speed ratio and pitch angle. For a small turbine separation distance of x/D=3 the downstream turbine is able to recover the major part of the power lost on the upstream turbine. However, no significant increase in the two-turbine array efficiency is achieved by altering the upstream turbine's operation point away from its optimum.