New Drive Train Concept with Multiple High Speed Generator

The Science of Making Torque from Wind

Barenhorst, F.^1 ; Serowy, S.^1 ; Andrei, C.^1 ; Schelenz, R.^1 ; Jacobs, G.^1 ; Hameyer, K.^1

Center for Wind Power Drives (CWD), RWTH Aachen University, Campus, Boulevard 61, Aachen

52074, Germany^1

关键词: Dynamic behaviors;    Economic affairs;    Energy yields;    High speed generators;    Permanent magnet synchronous generator;    Power splits;    Switching procedures;    Vibration behavior;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/753/11/112001/pdf
DOI  :  10.1088/1742-6596/753/11/112001

来源: IOP

【 摘 要 】

In the research project RapidWind (financed by the German Federal Ministry for Economic Affairs and Energy under Grant 0325642) an alternative 6 MW drive train configuration with six high-speed (n = 5000 rpm) permanent magnet synchronous generators for wind turbine generators (WTG) is designed. The gearbox for this drive train concept is assembled with a six fold power split spur gear stage in the first stage, followed by six individual 1 MW geared driven generators. Switchable couplings are developed to connect and disconnect individual geared generators depending on the input power. With this drive train configuration it is possible to improve the efficiency during partial load operation, increasing the energy yield about 1.15% for an exemplary low-wind site. The focus of this paper is the investigation of the dynamic behavior of this new WTG concept. Due to the high gear ratio the inertia relationship between rotor and generator differs from conventional WT concepts, possibly leading to intensified vibration behavior. Moreover there are switching procedures added, that might also lead to vibration issues.