High brilliant thermal and cold moderator for the HBS neutron source project Jülich

6th European Conference on Neutron Scattering

Cronert, T.^1 ; Dabruck, J.P.^2 ; Doege, P.E.^2 ; Bessler, Y.^4 ; Klaus, M.^5 ; Hofmann, M.^4 ; Zakalek, P.^1 ; Rücker, U.^1 ; Lange, C.^3 ; Butzek, M.^4 ; Hansen, W.^3 ; Nabbi, R.^2 ; Brückel, T.^1

JCNS-Jülich Centre for Neutron Science, Forschungszentrum Jülich GmbH, Germany^1

NET, RWTH Aachen University, Germany^2

Institute of Power Engineering, TU Dresden, Germany^3

ZEA-1-Engineering and Technology, Forschungszentrum Jülich, Germany^4

Bitzer-Stiftungsprofessur für Kálte-, Kryo-und Kompressorentechnik, TU Dresden, Germany^5

关键词: Beam extraction;    Cold moderators;    Energy spectroscopy;    Feasibility studies;    Heat capacity measurements;    Parameter studies;    Particle source;    Research centres;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/746/1/012036/pdf
DOI  :  10.1088/1742-6596/746/1/012036

来源: IOP

【 摘 要 】

The proposed High Brilliance Neutron Source (HBS), recognized within the Helmholtz Association of German Research Centres, will optimize the entire chain from particle source through particle accelerator, target, moderator, reflector, shielding, beam extraction, beam transport all the way to the detector, utilizing the nuclear Be(p,n) or Be(d,n) reaction in the lower MeV energy range. A D2O moderating reflector prototype (MRP) and a cold source were constructed and build according to MCNP parameter studies. The MRP was tested in a feasibility study at the TREFF instrument at MLZ (Garching). Cold beam extraction from the flux maximum within the moderator based on liquid para H2and other cold moderators will be tested by energy spectroscopy via TOF-method. Different ratios of liquid ortho/para H2will be fed to the cold moderator. The ratio will be controlled by feeding from reservoires of natural liquid H2and a storage loop with an ortho/para converter and determined via online heat capacity measurement.