Influence of PCMs in thermal insulation on thermal behaviour of building envelopes

7th European Thermal-Sciences Conference

Dydek, K.^1 ; Furmaski, P.^1 ; Lapka, P.^1

Institute of Heat Engineering, Warsaw University of Technology, 21/25 Nowowiejska St, Warsaw

00-665, Poland^1

关键词: Absorption and scatterings;    Building envelopes;    Local thermal equilibrium;    Model of heat transfers;    Radiation emissions;    Temperature fluctuation;    Thermal behaviours;    Thermal insulation layer;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/745/3/032138/pdf
DOI  :  10.1088/1742-6596/745/3/032138

来源: IOP

【 摘 要 】

A model of heat transfer through a wall consisting of a layer of concrete and PCM enhanced thermal insulation is considered. The model accounts for heat conduction in both layers, thermal radiation and heat absorption/release due to phase change in the insulation as well as time variation in the ambient temperature and insolation. Local thermal equilibrium between encapsulated PCM and light-weight thermal insulation was assumed. Radiation emission, absorption and scattering were also accounted for in the model. Comparison of different cases of heat flow through the building envelope was carried out. These cases included presence or absence of PCM and thermal radiation in the insulation, effect of emissivity of the PCM microcapsules as well as an effect of solar radiation or its lack on the ambient side of the envelope. Two ways of the PCM distribution in thermal insulation were also considered. The results of simulations were presented for conditions corresponding to the mean summer and winter seasons in Warsaw. It was found that thermal radiation plays an important role in heat transfer through thermal insulation layer of the wall while the presence of the PCM in it significantly contributes to damping of temperature fluctuations and a decrease in heat fluxes flowing into or lost by the interior of the building. The similar effect was observed for a decrease in emissivity of the microcapsules containing PCM.