Numerical study of a PCM-air heat exchanger's thermal performance

7th European Thermal-Sciences Conference

Herbinger, F.^1 ; Bhouri, M.^1 ; Groulx, D.^1

Mechanical Engineering Department, Dalhousie University, Halifax

NS, Canada^1

关键词: Air temperature;    Comsol multiphysics;    Convective heat transfer;    Dodecanoic acid;    Heat transfer rate;    HVAC applications;    Small channels;    Thermal Performance;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/745/3/032127/pdf
DOI  :  10.1088/1742-6596/745/3/032127

来源: IOP

【 摘 要 】

In this paper, the use of PCMs in HVAC applications is investigated by studying numerically the thermal performance of a PCM-air heat exchanger. The PCM used in this study is dodecanoic acid. A symmetric 3D model, incorporating conductive and convective heat transfer (air only) as well as laminar flow, was created in COMSOL Multiphysics 5.0. Simulations examined the dependence of the heat transfer rate on the temperature and velocity of the incoming air as well as the size of the channels in the heat exchanger. Results indicated that small channels size lead to a higher heat transfer rates. A similar trend was also obtained for high incoming air temperature, whereas the heat transfer rate was less sensitive to the incoming air velocity.