Two-phase flow patterns in adiabatic and diabatic corrugated plate gaps

7th European Thermal-Sciences Conference

Polzin, A.-E.^1 ; Kabelac, S.^1 ; De Vries, B.^2

Institute for Thermodynamics, Leibniz University Hannover, Germany^1

Kelvion PHE GmbH, Sarstedt, Germany^2

关键词: Corrugated plate;    Corrugation angles;    Flow pattern map;    Fluid property;    Momentum flux;    Plate geometry;    Plate heat exchangers;    Two-phase heat transfer;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/745/3/032111/pdf
DOI  :  10.1088/1742-6596/745/3/032111

来源: IOP

【 摘 要 】

Correlations for two-phase heat transfer and pressure drop can be improved considerably, when they are adapted to specific flow patterns. As plate heat exchangers find increasing application as evaporators and condensers, there is a need for flow pattern maps for corrugated plate gaps. This contribution presents experimental results on flow pattern investigations for such a plate heat exchanger background, using an adiabatic visualisation setup as well as a diabatic setup. Three characteristic flow patterns were observed in the considered range of two-phase flow: bubbly flow, film flow and slug flow. The occurrence of these flow patterns is a function of mass flux, void fraction, fluid properties and plate geometry. Two different plate geometries having a corrugation angle of 27° and 63°, respectively and two different fluids (water/air and R365mfc liquid/vapor) have been analysed. A flow pattern map using the momentum flux is presented.