Heat transfer coefficient distribution over the inconel plate cooled from high temperature by the array of water jets

7th European Thermal-Sciences Conference

Malinowski, Z.^1 ; Telejko, T.^1 ; Cebo-Rudnicka, A.^1 ; Szajding, A.^1 ; Rywotycki, M.^1 ; Hadala, B.^1

AGH University of Science and Technology, Kraków, Poland^1

关键词: Controlled waters;    Heat conduction models;    Heat transfer coefficient distribution;    High temperature;    Inverse solution;    Micro-structure evolutions;    Plate temperature;    Steel products;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/745/3/032093/pdf
DOI  :  10.1088/1742-6596/745/3/032093

来源: IOP

【 摘 要 】

The industrial rolling mills are equipped with systems for controlled water cooling of hot steel products. A cooling rate affects the final mechanical properties of steel which are strongly dependent on microstructure evolution processes. In case of water jets cooling the heat transfer boundary condition can be defined by the heat transfer coefficient. In the present study one and three dimensional heat conduction models have been employed in the inverse solution to heat transfer coefficient. The inconel plate has been heated to about 900oC and then cooled by one, two and six water jets. The plate temperature has been measured by 30 thermocouples. The heat transfer coefficient distributions at plate surface have been determined in time of cooling.