Numerical simulation of turbulent heat transfer past a backward-facing step: 2D/3D RANS versus IDDES solutions

7th European Thermal-Sciences Conference

Smirnov, E.M.^1 ; Smirnovsky, A.A.^1 ; Schur, N.A.^1 ; Zaitsev, D.K.^1 ; Smirnov, P.E.^2

St.-Petersburg Polytechnic University, St.-Petersburg, Russia^1

ANSYS Germany GmbH, Otterfing, Germany^2

关键词: Backward facing step;    Experimental channels;    Finite volume code;    SST turbulence models;    Stanton numbers;    Steady-state computations;    Time-dependent computations;    Turbulent heat transfer;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/745/3/032016/pdf
DOI  :  10.1088/1742-6596/745/3/032016

来源: IOP

【 摘 要 】

The contribution covers results of numerical study of air flow and heat transfer past a backward-facing step at the Reynolds number of 28,000. The numerical simulation was carried out under conditions of the experiments of Vogel&Eaton (1985), where nominally 2D fluid dynamics and heat transfer in a channel with expansion ratio of 1.25 was investigated. Two approaches were used for turbulence modelling. First, the Menter SST turbulence model was used to perform refined 2D and 3D RANS steady-state computations. The 3D analysis was undertaken to evaluate effects of boundary layers developing on the sidewalls of the experimental channel. Then, 3D time-dependent computations were carried out using the vortex-resolving IDDES method and applying the spanwise-periodicity conditions. Comparative computations were performed using an in-house finite-volume code SINF/Flag-S and the ANSYS Fluent. The codes produced practically identical RANS solutions, showing in particular a difference of 4% in the central-line peak Stanton number calculated in 2D and 3D cases. The IDDES results obtained with two codes are in a satisfactory agreement. Comparing with the experimental data, the IDDES produces the best agreement for the wall friction, whereas the RANS solutions show superiority in predictions of the local Stanton number distribution.