Model Predictive Control considering Reachable Range of Wheels for Leg / Wheel Mobile Robots

13th International Conference on Motion and Vibration Control; 12th International Conference on Recent Advances in Structural Dynamics

Suzuki, Naito^1 ; Nonaka, Kenichiro^1 ; Sekiguchi, Kazuma^1

Department of Mechanical System Engineering, Graduate Devision in Engineering, Tokyo City University, Tokyo, Japan^1

关键词: Four-leg;    Joint angle;    Linear constraints;    Multiple linear constraints;    Nonlinear problems;    Obstacle avoidance controls;    Quadratic problem;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/744/1/012220/pdf
DOI  :  10.1088/1742-6596/744/1/012220

来源: IOP

【 摘 要 】

Obstacle avoidance is one of the important tasks for mobile robots. In this paper, we study obstacle avoidance control for mobile robots equipped with four legs comprised of three DoF SCARA leg/wheel mechanism, which enables the robot to change its shape adapting to environments. Our previous method achieves obstacle avoidance by model predictive control (MPC) considering obstacle size and lateral wheel positions. However, this method does not ensure existence of joint angles which achieves reference wheel positions calculated by MPC. In this study, we propose a model predictive control considering reachable mobile ranges of wheels positions by combining multiple linear constraints, where each reachable mobile range is approximated as a convex trapezoid. Thus, we achieve to formulate a MPC as a quadratic problem with linear constraints for nonlinear problem of longitudinal and lateral wheel position control. By optimization of MPC, the reference wheel positions are calculated, while each joint angle is determined by inverse kinematics. Considering reachable mobile ranges explicitly, the optimal joint angles are calculated, which enables wheels to reach the reference wheel positions. We verify its advantages by comparing the proposed method with the previous method through numerical simulations.