Quantifying the variability in stiffness and damping of an automotive vehicle's trim-structure mounts

13th International Conference on Motion and Vibration Control; 12th International Conference on Recent Advances in Structural Dynamics

Abolfathi, Ali^1 ; O'Boy, Dan J.^1 ; Walsh, Stephen J.^1 ; Dowsett, Amy^1 ; Fisher, Stephen A.^2

Department of Aeronautical and Automotive Engineering, Loughborough University, Loughborough, Leicestershire

LE11 3TU, United Kingdom^1

Jaguar Land Rover, Banbury Road, Gaydon, Warwick

CV35 0RR, United Kingdom^2

关键词: Automotive vehicle;    Effective stiffness;    Experimental rigs;    Manufacturing tolerances;    Noise and vibration;    Single degree of freedom systems;    Stiffness and damping;    Vehicle structures;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/744/1/012197/pdf
DOI  :  10.1088/1742-6596/744/1/012197

来源: IOP

【 摘 要 】

Small plastic clips are used in large numbers in automotive vehicles to connect interior trims to vehicle structures. The variability in their properties can contribute to the overall variability in noise and vibration response of the vehicle. The variability arises due to their material and manufacturing tolerances and more importantly due to the boundary condition. To measure their stiffness and damping, a simple experimental rig is used where a mass is supported by the clip which is modelled as a single degree of freedom system. The rig is designed in a way that it simulates the boundary condition as those of the real vehicle. The variability in clip and also due to the boundary condition at the structure side is first examined which is 7% for stiffness and 8% for damping. To simulate the connection of the trim side, a mount is built using a 3D printer. Rattling occurs in the response of the clips with loose connections, however by preloading the mount the effective stiffness increases and the rattling is eliminated. The variability due to the boundary condition at the trim side was as large as 40% for stiffness and 52% for damping.