Acceleration control system for semi-active in-car crib with joint application of regular and inverted pendulum mechanisms

13th International Conference on Motion and Vibration Control; 12th International Conference on Recent Advances in Structural Dynamics

Kawashima, T.^1

Kanagawa Institute of Technology, Shimo-ogino, Atsugi

1030, Japan^1

关键词: Acceleration feedback;    Brake mechanism;    Impulsive forces;    Inverted pendulum;    Inverted pendulum mechanism;    Semiactive control;    Simulation and modeling;    System supports;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/744/1/012019/pdf
DOI  :  10.1088/1742-6596/744/1/012019

来源: IOP

【 摘 要 】

To reduce the risk of injury to an infant in an in-car crib (or in a child safety bed) collision shock during a car crash, it is necessary to maintain a constant force acting on the crib below a certain allowable value. To realize this objective, we propose a semi-active in-car crib system with the joint application of regular and inverted pendulum mechanisms. The arms of the proposed crib system support the crib like a pendulum while the pendulum system itself is supported like an inverted pendulum by the arms. In addition, the friction torque of each arm is controlled using a brake mechanism that enables the proposed in-car crib to decrease the acceleration of the crib gradually and maintain it around the target value. This system not only reduces the impulsive force but also transfers the force to the infant's back using a spin control system, i.e., the impulse force acts is made to act perpendicularly on the crib. The spin control system was developed in our previous work. This work focuses on the acceleration control system. A semi-active control law with acceleration feedback is introduced, and the effectiveness of the system is demonstrated using numerical simulation and model experiment.