Casing strength degradation in thermal environment of steam injection wells

4th International Conference on Science & Engineering in Mathematics, Chemistry and Physics 2016

数学;化学;物理学

Hidayat, M.I.P.^1,2 ; Irawan, S.^1 ; Abdullah, Mohamad Zaki^1

Department of Petroleum Engineering, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, Tronoh, Perak Darul Ridzuan

31750, Malaysia^1

Department of Materials and Metallurgical Engineering, Institut Teknologi Sepuluh Nopember, Kampus ITS Keputih Sukolilo, Surabaya

60111, Indonesia^2

关键词: 3D-finite element analysis;    Casing strength;    Steam injection;    Steam injection process;    Steam injection wells;    Thermal applications;    Thermal environment;    Three dimensional finite elements;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/710/1/012017/pdf
DOI  :  10.1088/1742-6596/710/1/012017

来源: IOP

【 摘 要 】

Degradation of the casing strength in relation with thermal cycles of steam injection process is still less explored in literature. In this paper, three-dimensional finite element (FE) analysis of casing strength degradation in thermal environment of steam injection wells is presented. 3D FE models consisting of casing-cement-formation system are developed in this study. Grade N80 casing is employed with the casing length of 3.048 m. In the analysis, cyclic thermal stresses induced on the casing in thermal environment of steam injection wells from 25 °C to 360 °C are first examined to verify the feasibility of the 3D FE models. Degradation of the casing strength in the thermal environment is subsequently investigated by applying an external pressure that represents formation pressure to the casing-cement system. The results show that the casing capability to resist the pressure is lowering as the number of thermal cycles extends, thus causing casing strength degradation in the thermal application. It is also shown that the casing may fail under external pressure below its specified collapse strength i.e. 10 % lower than the reference casing strength obtained at 360 °C.