Production of Starch Based Bioplastic from Cassava Peel Reinforced with Microcrystalline Celllulose Avicel PH101 Using Sorbitol as Plasticizer

4th International Conference on Science & Engineering in Mathematics, Chemistry and Physics 2016

数学;化学;物理学

Maulida^1 ; Siagian, M.^1 ; Tarigan, P.^1

Department of Chemical Engineering, University of North Sumatera, Medan, Indonesia^1

关键词: Avicel PH101;    Bio-plastics;    Cassava peel;    Elongation at break;    Micro-crystalline cellulose;    Reinforcing fillers;    Starch-based;    Water uptake;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/710/1/012012/pdf
DOI  :  10.1088/1742-6596/710/1/012012

来源: IOP

【 摘 要 】

The production of starch based bioplastics from cassava peel reeinforced with microcrystalline cellulose using sorbitol as plasticizer were investigated. Physical properties of bioplastics were determined by density, water uptake, tensile strength and Fourier Transform Infrared Spectroscopy. Bioplastics were prepared from cassava peel starch plasticized using sorbitol with variation of 20; 25; 30% (wt/v of sorbitol to starch) reinforced with microcrystalline celllulose (MCC) Avicel PH101 fillers with range of 0 to 6% (wt/wt of MCC to starch). The results showed improvement in tensile strength with higher MCC content up to 9, 12 mpa compared to non-reinforced bioplastics. This could be mainly attributed to the strong hydrogen bonds between MCC and starch. On the contrary, the addition of MCC decreased the elongation at break, density and water uptake. Fourier Transform Infrared Spectroscopy showed the functional groups of bioplastics, which the majority of O-H groups were found at the bioplastics with reinforcing filler MCC that represented substantial hydrogen bonds. The highest tensile strength value was obtained for bioplastic with MCC content 6% and sorbitol content 20%. With good adhesion between MCC and starch the production of bioplastics could be widely used as a substitute for conventional plastics with more benefits to the environment.