Experimental set up of a magnetoelectric measuring system operating at different temperatures

3rd International Meeting for Researchers in Materials and Plasma Technology; 1st Symposium on Nanoscience and Nanotechnology

物理学;材料科学

Gil, K.^1 ; Gil, J.^1 ; Cruz, B.^1 ; Ramirez, A.^1 ; Medina, M.^1 ; Torres, J.^2

Universidad Tecnológica de Pereira, Pereira, Colombia^1

Universidad de Caldas, Manizales, Colombia^2

关键词: Electrical response;    Experimental equipments;    Fundamental component;    Increasing temperatures;    Instrumentation and control;    Magnetic stimulation;    Magnetoelectric coefficients;    Magnetoelectric voltage;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/687/1/012090/pdf
DOI  :  10.1088/1742-6596/687/1/012090

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

The magnetoelectric effect is the phenomenon whereby through a magnetic stimulation can be produced an electrical response or vice versa. We implement a magnetoelectric voltage measuring device through the dynamic method for a different range of temperatures. The system was split into an electric set and an instrumentation and control set. Design and element selection criteria that the experimenter must take into account are presented, with special emphasis in the design of the sample holder, which is the fundamental component that differentiates the system operating at high temperature and the one operating at room temperature. The experimental equipment consists of an electromagnet with DC magnetic flux density (B) in a range of (0.0 to 1.6) KOe, a Helmholtz coil which operates with a sinusoidal B between (0.0 and 0.016) KOe and a PT100 temperature sensor. A tubular heating resistance, a Checkman temperature control and an SSR 40A were used for controlling the temperature. As an application of the system, the transverse and longitudinal magnetoelectric coefficient was measured for a thin film of BiFeO3at room temperature and 307K. It was observed that the behaviour of the longitudinal and transverse magnetoelectric coefficient matches the reported value and decreased with increasing temperature.