Study of local structure in hyper-eutectic Zr-Cu-Al bulk glassy alloys by positron annihilation techniques

The International Workshop on Positron Studies of Defects 2014

Ishiyama, T.^1 ; Ishii, K.^1 ; Yokoyama, Y.^2 ; Konno, T.J.^2 ; Iwase, A.^1 ; Hori, F.^1

Department of Materials Science, Osaka Prefecture University, 1-1 Gakuen-cho, Naka-ku, Osaka, Sakai

599-831, Japan^1

Institute for Materials Research, Tohoku University, 2-1-1, Katahira, Aoba-ku, Sendai

980-8577, Japan^2

关键词: Amorphous structures;    Coincidence doppler broadening;    Compositional alloys;    Compositional dependence;    High strength and toughness;    Internal structure;    Positron annihilation lifetimes;    Positron annihilation technique;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/674/1/012008/pdf
DOI  :  10.1088/1742-6596/674/1/012008

来源: IOP

【 摘 要 】

The Zr-Cu-Al bulk glassy (BG) alloy, which has amorphous structure, possesses various properties such as high strength and toughness with compositional dependence. In the present study, density, positron annihilation lifetime and coincidence Doppler Broadening measurement have been performed for various compositional hyper-eutectic Zr-Cu-Al BG alloys. The density of hyper-eutectic Zr-Cu-Al BG alloys increases with decreasing of Zr fraction. In contrast, positron lifetime for all compositional alloys is almost constant about 165 psec. In addition, the CDB ratio profile is almost the same for hyper-eutectic alloys. This unchanging trend of CDB ratio profile is quite different from that of hypo-eutectic BG alloys. These results reveal that different internal structure exists in hyper and hypo-eutectic BG alloys.