The Method of Manufacturing Nonmetallic Test-Blocks on Different Sensitivity Classes

3rd All-Russian Scientific and Practical Conference on Innovations in Non-Destructive Testing

Kalinichenko, N.P.^1 ; Kalinichenko, A.N.^1 ; Lobanova, I.S.^1 ; Zaitseva, A.A.^1 ; Loboda, E.L.^2

Institute of Nondestructive Testing, National Research Tomsk Polytechnic University, Tomsk, Russia^1

Department of Physical and Computing Mechanics, National Research Tomsk State University, Tomsk, Russia^2

关键词: Liquid-penetrant testing;    Non destructive;    Penetrant testing;    Quality evaluation;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/671/1/012033/pdf
DOI  :  10.1088/1742-6596/671/1/012033

来源: IOP

【 摘 要 】

Nowadays in our modern world there is a vital question of quality control of details made from nonmetallic materials due to their wide spreading. Nondestructive penetrant testing is effective, and in some cases it is the only possible method of accidents prevention at high- risk sites. A brief review of check sample necessary for quality evaluation of penetrant materials is considered. There was offered a way of making agents for quality of penetrant materials testing according to different liquid penetrant testing sensibility classes.