Plasma technologies application for building materials surface modification

7th Conference on Low temperature Plasma in the Processes of Functional Coating Preparation

Volokitin, G.G.^1 ; Skripnikova, N.K.^1 ; Volokitin, O.G.^1 ; Shehovtzov, V.V.^1 ; Luchkin, A.G.^2 ; Kashapov, N.F.^2

Tomsk State University of Architecture and Building, 2 Solyanaya sq., Tomsk

634003, Russia^1

Kazan (Volga Region) Federal University, 18 Kremljovskaja str., Kazan

420008, Russia^2

关键词: Compression resistance;    Geometrical stability;    Low temperature plasmas;    Materials surface modifications;    Operational properties;    Plasma technology;    Traditional processing;    Water permeability;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/669/1/012065/pdf
DOI  :  10.1088/1742-6596/669/1/012065

来源: IOP

【 摘 要 】

Low temperature arc plasma was used to process building surface materials, such as silicate brick, sand lime brick, concrete and wood. It was shown that building surface materials modification with low temperature plasma positively affects frost resistance, water permeability and chemical resistance with high adhesion strength. Short time plasma processing is rather economical than traditional processing thermic methods. Plasma processing makes wood surface uniquely waterproof and gives high operational properties, dimensional and geometrical stability. It also increases compression resistance and decreases inner tensions level in material.