Laboratory bench for the characterization of triboelectric properties of polymers

Electrostatics 2015

物理学;数学

Neagoe, Bogdan^1 ; Prawatya, Yopa^1 ; Zeghloul, Thami^1 ; Souchet, Dominique^1 ; Dascalescu, Lucian^1

Institut p', UPR 3346 CNRS, Université de Poitiers - ENSMA, Angoulême, France^1

关键词: Capacitive probe;    Conformal contacts;    Electrostatic voltmeter;    Experimental bench;    Mechanical and thermal properties;    Non-uniformities;    Normal contact force;    Polymer materials;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/646/1/012058/pdf
DOI  :  10.1088/1742-6596/646/1/012058

来源: IOP

【 摘 要 】

The use of polymers as materials for sliding machine components is due to their low cost, ease of manufacturing, as well as appropriate mechanical and thermal properties. The aim of this paper is to present the experimental bench designed for the study of the triboelectric charge generated in sliding conformal contacts between flat polymer materials. The experiments were performed with 4-mm-thick samples of polystyrene and 5-mm-thick samples of poly-vinyl-chloride.The normal contact force can be adjusted using an appropriate control system and measured by a force sensor (± 50 N). The translational back-and-forth motion of the samples is produced by a crank-shaft system that generates a sinusoidal translational speed profile, with amplitudes between 12 and 50 mm/s, for strokes of 36 to 60 mm. The distribution of charge at the surface of the samples is measured by the capacitive probe of an electrostatic voltmeter (± 10 kV). The experiments pointed out that this bench enables the evaluation of the non-uniformity of the electric charge accumulated on the sliding bodies and the study of the correlations that might exists between this charge and the external forces applied to the contact.