The use of strain gauges in vibration-based damage detection

11th International Conference on Damage Assessment of Structures

物理学;材料科学

Marques Dos Santos, Fabio Luis^1,2,3 ; Peeters, Bart^1 ; Lau, Jenny^1 ; Desmet, Wim^2 ; Goes, Luiz Carlos Sandoval^3

Siemens Industry Software NV, Interleuvenlaan 68, Leuven

3001, Belgium^1

KU Leuven, Division PMA, Celestijnenlaan 300B, Heverlee

3001, Belgium^2

Instituto Tecnologico de Aeronáutica (ITA), Praça Marechal Eduardo Gomes, 50 - Vila das Acácias, São José dos Campos SP

CEP 12.228-900, Brazil^3

关键词: Damage detection technique;    Damage Identification;    Main parameters;    Modal parameters;    Sensitive parameter;    Strain frequency response functions;    Structural health monitoring (SHM);    Vibration-based damage detection;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/628/1/012119/pdf
DOI  :  10.1088/1742-6596/628/1/012119

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

Strain gauges and strain measurements have been widely used in structural health monitoring (SHM) systems as a means of detecting and localizing damage, due to their higher sensitivity to local damage. These damage identification techniques normally use strain related measurements such as the mode curvature, strain frequency response function or strain energy as the main parameter to detect damage. However, damage detection techniques based on acceleration measurements have also been investigated in the past, using modal parameter comparison and other methodologies. In this paper, the use of vibration-based strain measurements for use in SHM systems will be evaluated, with the purpose of characterizing their higher sensitivity in damage detection, when compared to other vibration measurements, such as acceleration-based measurements. Since the choice and use of the most damage sensitive parameter can lead to a more sensitive and robust system, the assessment of the more suitable sensor and processing of information is very important. For this purpose, numerical and experimental examples will be discussed to evaluate the higher performance of the strain gauges.