Detection and classification of alarm threshold violations in condition monitoring systems working in highly varying operational conditions

11th International Conference on Damage Assessment of Structures

物理学;材料科学

Strczkiewicz, M.^1 ; Barszcz, T.^1 ; Jabloski, A.^1

AGH University of Science and Technology, Faculty of Mechanical Engineering and Robotics, 30 Mickiewicza Av., Krakow

30-059, Poland^1

关键词: Alarm thresholds;    Complex machinery;    Condition monitoring systems;    Measured values;    Operating condition;    Operational conditions;    Operational state;    Severity factor;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/628/1/012087/pdf
DOI  :  10.1088/1742-6596/628/1/012087

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

All commonly used condition monitoring systems (CMS) enable defining alarm thresholds that enhance efficient surveillance and maintenance of dynamic state of machinery. The thresholds are imposed on the measured values such as vibration-based indicators, temperature, pressure, etc. For complex machinery such as wind turbine (WT) the total number of thresholds might be counted in hundreds multiplied by the number of operational states. All the parameters vary not only due to possible machinery malfunctions, but also due to changes in operating conditions and these changes are typically much stronger than the former ones. Very often, such a behavior may lead to hundreds of false alarms. Therefore, authors propose a novel approach based on parameterized description of the threshold violation. For this purpose the novelty and severity factors are introduced. The first parameter refers to the time of violation occurrence while the second one describes the impact of the indicator-increase to the entire machine. Such approach increases reliability of the CMS by providing the operator with the most useful information of the system events. The idea of the procedure is presented on a simulated data similar to those from a wind turbine.