Damage localization in plates with use of the procedure based on Modal Filtration

11th International Conference on Damage Assessment of Structures

物理学;材料科学

Dworakowski, Ziemowit^1 ; Ambrozinski, Lukasz^1 ; Mendrok, Krzysztof^1

AGH University of Science and Technology, al. Mickiewicza 30, Krakow

30-059, Poland^1

关键词: Ambient temperature change;    Beam-like structures;    Damage localization;    Modal filtering;    Modal parameters;    Object dynamics;    Plate-like structure;    System characteristics;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/628/1/012028/pdf
DOI  :  10.1088/1742-6596/628/1/012028

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

Modal filtering has numerous applications in the analysis of object dynamics. One possible use of this technique, recently presented in the literature, is damage detection. The main idea behind it, is to compare system characteristics filtered with modal filter for damaged and undamaged state. If a structural change appears in the system the filter does not work perfectly and its output significantly differs from one obtained for the healthy structure. Method is based on the modal parameter variation due to damage but does not require the modal analysis for every diagnosis. Another advantages are: computational simplicity and robustness for ambient temperature changes. The method was extended in 2008 with the possibility of damage localization. The idea here was based on the fact that local damage disturbs mode shapes locally. Instead of one modal filter, set of local modal filters were identified and used for further processing. Area of the structure connected with the filter with the worst performance is suspected of containing the damage. The method was already presented and positively verified but only for the beam-like structures. In this paper, application for plate-like structures is shown.