Detailed characterization of welding fumes in personal exposure samples

4th International Conference on Safe Production and Use of Nanomaterials

Quémerais, B.^1 ; Mino, James^1 ; Amin, M.R.^1 ; Golshahi, H.^1 ; Izadi, H.^1

Division of Preventive Medicine, University of Alberta, 107 University Campus NW, Edmonton

AB

T6G 2S2, Canada^1

关键词: Chemical compositions;    Collection efficiency;    Collection systems;    Individual particles;    Metal concentrations;    Particle number concentration;    Personal exposures;    Robotic welding systems;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/617/1/012011/pdf
DOI  :  10.1088/1742-6596/617/1/012011

来源: IOP

【 摘 要 】

The objective of the project was to develop a method allowing for detailed characterization of welding particles including particle number concentration, size distribution, surface chemistry and chemical composition of individual particles, as well as metal concentration of various welding fumes in personal exposure samples using regular sampling equipment. A sample strategy was developed to evaluate the variation of the collection methods on mass concentration. Samples were collected with various samplers and filters at two different locations using our collection system. The first location was using a robotic welding system while the second was manual welding. Collected samples were analysed for mass concentration using gravimetryand metal concentration using ICP/OES. More advanced analysis was performed on selected filters using X-Ray Photoelectron Spectroscopy to determine surface composition of the particles, and X-Ray Diffraction to determine chemical composition of the fumes. Results showed that the robotic system had a lot of variation in space when the collection system was located close to the weld. Collection efficiency was found to be quite variable depending upon the type of filter. As well, metal concentrations in blank filters were dependent upon the type of filter with MCE presenting with the highest blank values. Results obtained with the XRD and XPS systems showed that it was possible to analyse a small of powdered welding fume sample but results on filters were not conclusive.