Structural Considerations of a 20MW Multi-Rotor Wind Energy System

The Science of Making Torque from Wind 2012

Jamieson, P.^1 ; Branney, M.^1

EPSRC Doctoral Training Centre in Wind Energy Systems, University of Strathclyde, G1 1XW, United Kingdom^1

关键词: Aerodynamic loss;    Current technology;    Electrical interconnections;    Multi-rotor system;    Reliable components;    Structural concept;    Support structures;    Wind energy systems;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/555/1/012013/pdf
DOI  :  10.1088/1742-6596/555/1/012013

来源: IOP

【 摘 要 】

The drive to upscale offshore wind turbines relates especially to possiblereductions in O&M and electrical interconnection costs per MW of installed capacity.Even with best current technologies, designs with rated capacity above about 3 MW are less cost effective exfactory per rated MW(turbine system costs) than smaller machines.Very large offshore wind turbines are thereforejustifiedprimarily by overall offshore project economics. Furthermore, continuing progress in materials and structures has been essential to avoid severe penalties in the power/mass ratio of large multi-MW machines.The multi-rotor concept employs many small rotors to maximise energy capture area withminimum systemvolume. Previous work has indicated that this can enablea very large reduction in the total weight and cost of rotors and drive trains compared to an equivalent large single rotor system.Thus the multi rotor concept may enable rated capacities of 20 MW or more at a single maintenancesite. Establishing the cost benefit of a multi rotor system requires examination of solutions for the support structure and yawing, ensuring aerodynamic losses from rotor interaction are not significant and that overall logistics, with much increased part count (more reliable components) and less consequence of single failuresare favourable. This paper addresses the viability of a support structure in respect of structural concept and likely weight as one necessary step in exploring the potential of the multi rotor concept.