Helical coil thermal hydraulic model

32nd UIT (Italian Union of Thermo–fluid-dynamics) Heat Transfer Conference

物理学;力学

Caramello, M.^1 ; Bertani, C.^1 ; De Salve, M.^1 ; Panella, B.^1

Energy Department, Politecnico di Torino, Corso Duca degli Abruzzi 24, Torino

10129, Italy^1

关键词: Control volumes;    Developed model;    MATLAB environment;    Modular reactors;    Thermal hydraulic modeling;    Thermal hydraulic parameters;    Thermal-hydraulic analysis;    Thermodynamic conditions;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/547/1/012034/pdf
DOI  :  10.1088/1742-6596/547/1/012034

学科分类：力学，机械学

来源: IOP

【 摘 要 】

A model has been developed in Matlab environment for the thermal hydraulic analysis of helical coil and shell steam generators. The model considers the internal flow inside one helix and its associated control volume of water on the external side, both characterized by their inlet thermodynamic conditions and the characteristic geometry data. The model evaluates the behaviour of the thermal-hydraulic parameters of the two fluids, such as temperature, pressure, heat transfer coefficients, flow quality, void fraction and heat flux. The evaluation of the heat transfer coefficients as well as the pressure drops has been performed by means of the most validated literature correlations. The model has been applied to one of the steam generators of the IRIS modular reactor and a comparison has been performed with the RELAP5/Mod.3.3 code applied to an inclined straight pipe that has the same length and the same elevation change between inlet and outlet of the real helix. The predictions of the developed model and RELAP5/Mod.3.3 code are in fairly good agreement before the dryout region, while the dryout front inside the helical pipes is predicted at a lower distance from inlet by the model.