Numerical simulation of turbulent forced convection in liquid metals

32nd UIT (Italian Union of Thermo–fluid-dynamics) Heat Transfer Conference

物理学;力学

Vodret, S.^1 ; Di Maio, D. Vitale^1 ; Caruso, G.^1

Sapienza University of Rome, Dep. of Astronautic, Electrical and Energy Engineering (DIAEE), Corso Vittorio Emanuele II, Rome

244-00186, Italy^1

关键词: Computational resources;    Dynamic calculations;    Function approaches;    Low Prandtl number;    Temperature profiles;    Thermal boundary layer;    Turbulent forced convection;    Turbulent Prandtl number;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/547/1/012033/pdf
DOI  :  10.1088/1742-6596/547/1/012033

学科分类：力学，机械学

来源: IOP

【 摘 要 】

In the frame of the future generation of nuclear reactors, liquid metals are foreseen to be used as a primary coolant. Liquid metals are characterized by a very low Prandtl number due to their very high heat diffusivity. As such, they do not meet the so-called Reynolds analogy which assumes a complete similarity between the momentum and the thermal boundary layers via the use of the turbulent Prandtl number. Particularly, in the case of industrial fluid-dynamic calculations where a resolved computation near walls could be extremely time consuming and could need very large computational resources, the use of the classical wall function approach could lead to an inaccurate description of the temperature profile close to the wall. The first aim of the present study is to investigate the ability of a well- established commercial code (ANSYS FLUENT v.14) to deal with this issue, validating a suitable expression for the turbulent Prandtl number. Moreover, a thermal wall-function developed at Universite Catholique de Louvain has been implemented in FLUENT and validated, overcoming the limits of the solver to define it directly. Both the resolved and unresolved approaches have been carried out for a channel flow case and assessed against available direct numerical and large eddy simulations. A comparison between the numerically evaluated Nusselt number and the main correlations available in the literature has been also carried out. Finally, an application of the proposed methodology to a typical sub-channel case has been performed, comparing the results with literature correlations for tube banks.