Numerical evaluation of gas core length in free surface vortices

32nd UIT (Italian Union of Thermo–fluid-dynamics) Heat Transfer Conference

物理学;力学

Cristofano, L.^1 ; Nobili, M.^1 ; Caruso, G.^1

Sapienza University of Rome, Dep. of Astronautic, Electrical and Energy Engineering (DIAEE), Corso Vittorio Emanuele II, Rome

244-00186, Italy^1

关键词: Computational domains;    Formation and evolutions;    Free-surface vortices;    Gas-liquid interface;    Gas-liquid interface deformation;    Prediction methods;    Reactivity fluctuation;    VOF (volume of fluid) method;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/547/1/012030/pdf
DOI  :  10.1088/1742-6596/547/1/012030

学科分类：力学，机械学

来源: IOP

【 摘 要 】

The formation and evolution of free surface vortices represent an important topic in many hydraulic intakes, since strong whirlpools introduce swirl flow at the intake, and could cause entrainment of floating matters and gas. In particular, gas entrainment phenomena are an important safety issue for Sodium cooled Fast Reactors, because the introduction of gas bubbles within the core causes dangerous reactivity fluctuation. In this paper, a numerical evaluation of the gas core length in free surface vortices is presented, according to two different approaches. In the first one, a prediction method, developed by the Japanese researcher Sakai and his team, has been applied. This method is based on the Burgers vortex model, and it is able to estimate the gas core length of a free surface vortex starting from two parameters calculated with single-phase CFD simulations. The two parameters are the circulation and the downward velocity gradient. The other approach consists in performing a two-phase CFD simulation of a free surface vortex, in order to numerically reproduce the gas- liquid interface deformation. Mapped convergent mesh is used to reduce numerical error and a VOF (Volume Of Fluid) method was selected to track the gas-liquid interface. Two different turbulence models have been tested and analyzed. Experimental measurements of free surface vortices gas core length have been executed, using optical methods, and numerical results have been compared with experimental measurements. The computational domain and the boundary conditions of the CFD simulations were set consistently with the experimental test conditions.