Visual analysis of flow boiling at different gravity levels in 4.0 mm tube

32nd UIT (Italian Union of Thermo–fluid-dynamics) Heat Transfer Conference

物理学;力学

Valencia-Castillo, C.M.^1 ; Celata, G.P.^2 ; Saraceno, L.^2 ; Zummo, G.^2

University of Guanajuato, Salamanca, Mexico^1

ENEA, via Anguillarese 301, Rome, Italy^2

关键词: Bubble diameter;    Experimental campaign;    Experimental conditions;    Flow boiling heat transfer;    Gravity conditions;    Inertial forces;    Parabolic flight;    Visual analysis;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/547/1/012029/pdf
DOI  :  10.1088/1742-6596/547/1/012029

学科分类：力学，机械学

来源: IOP

【 摘 要 】

The aim of the present paper is to describe the results of flow boiling heat transfer at low gravity and compare them with those obtained at earth gravity, evaluating possible differences. The experimental campaigns at low gravity have been performed during the parabolic flight campaign of October-November 2013. The paper will show the analysis of differences between the heat transfer coefficients and vapour bubble parameters at normal and at zero gravity. The results of 4.0 mm tube are presented and discussed. With respect to terrestrial gravity, heat transfer is systematically lower at microgravity in the range of the experimental conditions. Heat transfer differences for the two gravity conditions are related to the different bubble size in each of them. The size of a bubble in flow boiling is affected by the gravity level, being larger at low gravity, unless inertial forces are largely predominant over buoyancy and other forces acting on the bubble itself when detaching from a heated wall. Vapour bubble parameters (bubble diameter, bubble length, width, and nose velocity) have been measured.