The influence of additives on rheological properties of limestone slurry

21st Fluid Mechanics Conference

物理学;力学

Jaworska, B.^1 ; Bartosik, A.^1

Faculty of Management and Computer Modelling, Kielce University of Technology, Al. Tysia¸clecia P.P. 7, 25-314 Kielce, Poland^1

关键词: Chemical additive;    Chemical treatments;    Degree of dispersion;    Limestone slurry;    Processed materials;    Rheological property;    Slurry properties;    Suspended particles;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/530/1/012052/pdf
DOI  :  10.1088/1742-6596/530/1/012052

学科分类：力学，机械学

来源: IOP

【 摘 要 】

Limestone slurry appears in the lime production process as the result of rinsing the processed material. It consists of particles with diameter smaller than 2 mm and the water that is a carrier of solid fraction. Slurry is directed to the settling tank, where the solid phase sediments and the excess water through the transfer system is recovered for re-circulation. Collected at the bottom of the tank sludge is deposited in a landfill located on the premises. Rheological properties of limestone slurry hinder its further free transport in the pipeline due to generated flow resistance. To improve this state of affairs, chemical treatment of drilling fluid, could be applied, of which the main task is to give the slurry properties suitable for the conditions encountered in hydrotransport. This treatment consists of applying chemical additives to slurry in sufficient quantity. Such additives are called as deflocculants or thinners or dispersants, and are chemical compounds which added to aqueous solution are intended to push away suspended particles from each other. The paper presents the results of research allowing reduction of shear stress in limestone slurry. Results demonstrate rheological properties of limestone slurry with and without the addition of modified substances which causes decrease of slurry viscosity, and as a consequence slurry shear stress for adopted shear rate. Achieving the desired effects increases the degree of dispersion of the solid phase suspended in the carrier liquid and improving its ability to smooth flow with decreased friction.