First-order aerodynamic and aeroelastic behavior of a single-blade installation setup

The Science of Making Torque from Wind 2014

Gaunaa, M.^1 ; Bergami, L.^1 ; Guntur, S.^1 ; Zahle, F.^1

DTU Wind Energy, Technical University of Denmark, Risø Campus, Roskilde, Denmark^1

关键词: Aeroelastic behavior;    Arbitrary direction;    Engineering modeling;    Future designs;    Installation costs;    Line tension;    Single blades;    Turbulent wind;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/524/1/012073/pdf
DOI  :  10.1088/1742-6596/524/1/012073

来源: IOP

【 摘 要 】

Limitations on the wind speed at which blade installation can be performed bears important financial consequences. The installation cost of a wind farm could be significantly reduced by increasing the wind speed at which blade mounting operations can be carried out. This work characterizes the first-order aerodynamic and aeroelastic behavior of a single blade installation system, where the blade is grabbed by a yoke, which is lifted by the crane and stabilized by two taglines. A simple engineering model is formulated to describe the aerodynamic forcing on the blade subject to turbulent wind of arbitrary direction. The model is coupled with a schematic aeroelastic representation of the taglines system, which returns the minimum line tension required to compensate for the aerodynamic forcing. The simplified models are in excellent agreement with the aeroelastic code HAWC2, and provide a solid basis for future design of an upgraded single blade installation system able to operate at higher wind speeds.