Arduino and Nagios integration for monitoring

20th International Conference on Computing in High Energy and Nuclear Physics

物理学;计算机科学

Fernández, V.^1 ; Pazos, A.^1 ; Saborido, J.^1 ; Seco, M.^1

Instituto Galego de Fisica de Altas Enerxías (IGFAE), Universidad de Santiago de Compostela, Santiago de Compostela, Spain^1

关键词: Computing clusters;    Data centres;    Historic data;    Keep track of;    Open hardware;    Operating ranges;    Optimal conditions;    Small data;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/513/6/062015/pdf
DOI  :  10.1088/1742-6596/513/6/062015

学科分类：计算机科学（综合）

来源: IOP

【 摘 要 】

The data centre at the Galician Institute of High Energy Physics (IGFAE) of the Santiago de Compostela University (USC) is a computing cluster with about 150 nodes and 1250 cores that hosts the LHCb Tiers 2 and 3. In this small data centre, and of course in similar or bigger ones, it is very important to keep optimal conditions of temperature, humidity and pressure. Therefore, it is a necessity to monitor the environment and be able to trigger alarms when operating outside the recommended settings. There are currently many tools and systems developed for data centre monitoring, but until recent years all of them were of commercial nature and expensive. In recent years there has been an increasing interest in the use of technologies based on Arduino due to its open hardware licensing and the low cost of this type of components. In this article we describe the system developed to monitor IGFAE's data centre, which integrates an Arduino controlled sensor network with the Nagios monitoring software. Sensors of several types, temperature, humidity and pressure, are connected to the Arduino board. The Nagios software is in charge of monitoring the various sensors and, with the help of Nagiosgraph, to keep track of the historic data and to produce the plots. An Arduino program, developed in house, provides the Nagios plugin with the readout of one or several sensors depending on the plugin's request. The Nagios plugin for reading the temperature sensors also broadcasts an SNMP trap when the temperature gets out of the allowed operating range.