HTS DC Transmission Line for Megalopolis Grid Development

11th European Conference on Applied Superconductivity

Kopylov, S.^1 ; Sytnikov, V.^1 ; Bemert, S.^1 ; Ivanov, Yu^1 ; Krivetskiy, I.^1 ; Romashov, M.^1 ; Shakaryan, Yu^1 ; Keilin, V.^2 ; Shikov, A.^2 ; Patrikeev, V.^2 ; Lobyntsev, V.^2 ; Shcherbakov, V.^2

R and D Center FGC UES, Moscow

115201, Russia^1

NRC Kurchatov Institute, Moscow

123185, Russia^2

关键词: Ac/dc converters;    Cable couplings;    Cable manufacturing;    DC transmission lines;    Electric power grids;    Environmental conditions;    Exclusion zones;    Plant capacities;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/507/3/032047/pdf
DOI  :  10.1088/1742-6596/507/3/032047

来源: IOP

【 摘 要 】

Using of HTS AC and DC cables in electric power grids allows increasing of the transferred power, losses diminishing, decreasing of exclusion zone areas, the enhancement of the environmental conditions and fire/explosion safety of electric power systems. However, the use of DC superconducting cable lines together with converters brings additional advantages as reduction of losses in cables and suitable lowering of refrigerating plant capacity, as well as the realization of the function of short-circuit currents limitation by means of the appropriate setting of converter equipment. Russian Federal Grid Company and its R&D Center started the construction of the DC HTS power transmission line which includes the cable itself, cryogenic equipment, AC/DC converters, terminals and cable coupling boxes. This line will connect two substations in Saint-Petersburg-330 kV "Centralnaya" and 220 kV "RP-9". The length of this HTS transmission line will be about 2500 meters. Nowadays are developed all the elements of the line and technologies of the cable manufacturing. Two HTS cable samples, each 30 m length, have been made. This paper describes the results of cables tests.