Critical current measurement of HTS tape relating with cable structure for a DC power cable

11th European Conference on Applied Superconductivity

Sun, Jian^1 ; Watanabe, Hirofumi^1 ; Hamabe, Makoto^1 ; Kawahara, Toshio^1 ; Yamaguchi, Satarou^1,2

Center of Applied Superconductivity and Sustainable Energy Research, Chubu University, Matsumoto-cho, 1200, Kasugai, Aichi

4878501, Japan^1

Department of Electrical Engineering, Chubu University, Matsumoto-cho, 1200, Kasugai, Aichi

4878501, Japan^2

关键词: BSCCO tape;    Cable structure;    DC power cable;    High temperature superconducting cables;    Power cables;    Superconducting layer;    Tape arrangements;    Two-layer structures;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/507/2/022038/pdf
DOI  :  10.1088/1742-6596/507/2/022038

来源: IOP

【 摘 要 】

In the 200 m high temperature superconducting (HTS) cable test facility at Chubu University, a coaxial power cable is used and composed of two BSCCO (Bi-2223) superconducting layers. The tapes are wound closely to reduce effects on the critical current of BSCCO at self-field. Accordingly, each superconducting layer has a different number of BSCCO tapes. Previously, we have investigated dependence of the critical current (Ic) on the gap in order to optimize the HTS DC cable design. We have been studying the effect on the performance of HTS tapes for the superconducting DC power cables by critical current measurements. In the present experiments several HTS tapes are used and set as a similar structure in the cable with a two-layer structure. The critical current of HTS tapes are measured against the gap between the tapes in the same layer. The experiments show the improvement of the critical current by optimizing the tape arrangements due to magnetic field interaction between the tapes. We will present the experimental results and discuss the design of the HTS DC cable.