Observation of sub-detonation response in confined high density HMX based PBXs

18th APS-SCCM; 24th AIRAPT

Cook, M.D.^1 ; Wood, A.D.^1 ; Ottley, P.R.^1 ; Cheese, P.J.^2

QinetiQ Ltd, MoD Fort Halstead, Sevenoaks, Kent

TN14 7BP, United Kingdom^1

DEandS, MoD, Abbey Wood, Bristol

BS34 8JH, United Kingdom^2

关键词: Bullseye;    De-consolidation;    Highly loaded;    Hydro codes;    PBX compositions;    Pressure and temperature;    Shock compressions;    Violent reactions;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/500/5/052009/pdf
DOI  :  10.1088/1742-6596/500/5/052009

来源: IOP

【 摘 要 】

This paper describes experiments and modelling aimed at understanding the behaviour of highly loaded (90%-95%) pressed HMX-based PBX compositions, when subjected to shock compression and ignition, by means of a propellant donor charge, under confinement. Such tests are routinely carried out in the UK on new formulations to determine their burn to violent reaction characteristics. The Bullseye propellant donor charge has been characterised in terms of pressure and temperature output. A range of tubes have been designed to examine the contribution of tube material properties (steel versus aluminium, 218.5 MPa) and to examine the effect of reduced confinement (120 MPa). For the reduced confinement scenario polycarbonate as well as steel and aluminium vessels have been designed which allow the reaction of the energetic material to be captured using a Phantom high-speed camera. In particular, tests carried out in the polycarbonate tubes have given a good insight of the processes occurring. Preliminary hydrocode modelling runs predicted an oscillating compressive wave in the explosive and considerable damage at either end of the explosive column. The latter leads to potential deconsolidation once the donor charge has burnt out allowing increased burning and violence.