Investigations into rapid uniaxial compression of polycrystalline targets using femtosecond X-ray diffraction

18th APS-SCCM; 24th AIRAPT

McGonegle, David^1 ; Higginbotham, Andrew^1 ; Galtier, Eric^2 ; McBride, Emma E.^3,4 ; McMahon, Malcolm I.^4 ; Milathianaki, Despina^2 ; Lee, Hae Ja^2 ; Nagler, Bob^2 ; Vinko, Sam M.^1 ; Wark, Justin S.^1

Department of Physics, Clarendon Laboratory, University of Oxford, Parks Road, Oxford

OX1 3PU, United Kingdom^1

Linac Coherent Light Source, SLAC National Accelerator Laboratory, Menlo Park

CA

94025, United States^2

DESY Photon Science, Notkestr. 85, Hamburg

D-22607, Germany^3

School of Physics and Astronomy, University of Edinburgh, Edinburgh

EH9 3JZ, United Kingdom^4

关键词: Compression experiments;    High strain rates;    In-situ X-ray diffraction;    Laser experiments;    Long pulse laser;    Polycrystalline copper;    Transverse strain;    Uni-axial compression;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/500/11/112063/pdf
DOI  :  10.1088/1742-6596/500/11/112063

来源: IOP

【 摘 要 】

Although the pressures achievable in laser experiments continue to increase, the mechanisms underlying how solids deform at high strain rates are still not well understood. In particular, at higher pressures, the assumption that the difference between the longitudinal and transverse strains in a sample remains small becomes increasingly invalid. In recent years, there has been an increasing interest in simulating compression experiments on a granular level. In situ X-ray diffraction, where a target is probed with X-rays while a shock is propagating through it, is an excellent tool to test these simulations. We present data from the first long-pulse laser experiment at the MEC instrument of LCLS, the world's first hard X-ray Free Electron Laser, demonstrating large strain anisotropies. From this we infer shear stresses in polycrystalline copper of up to 1.75 GPa at a shock pressure of 32 GPa.