Steps toward thin film metal thermistors with microsecond time response for shock temperature measurements of polymers

18th APS-SCCM; 24th AIRAPT

Taylor, N.E.^1 ; Williamson, D.M.^1 ; Jardine, A.P.^1

SMF Fracture and Shock Physics Group, Cavendish Laboratory, J J Thomson Avenue, Cambridge

CB3 0HE, United Kingdom^1

关键词: Constraining equations;    Direct observations;    Fabrication technique;    Poly(methyl methacrylate) (PMMA);    Pressure and temperature;    Shock temperature measurements;    Thermal equilibriums;    Thin film metal;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/500/11/112061/pdf
DOI  :  10.1088/1742-6596/500/11/112061

来源: IOP

【 摘 要 】

Equations of state can be used to predict the relationship between pressure, volume and temperature. However, in shock physics, they are usually only constrained by experimental observations of pressure and volume. Direct observation of temperature in a shock is therefore valuable in constraining equations of state. Bloomquist and Sheffield (1980, 1981) and Rosenberg and Partom (1984) have attempted such observations in poly(methyl methacrylate) (PMMA). However, their results disagree strongly above 2GPa shock pressure. Here we present an improved fabrication technique, to examine this outstanding issue. We make use of the fact that the electrical resistivity of most metals is a known function of both pressure and temperature. If the change in resistance of a thin metal thermistor gauge is measured during a shock experiment of known pressure, the temperature can be calculated directly. The time response is limited by the time taken for the gauge to reach thermal equilibrium with the medium in which it is embedded. Gold gauges of thickness up to 200 nm have been produced by thermal evaporation, and fully embedded in PMMA. These reach thermal equilibrium with the host material in under 1 us, allowing temperature measurement within the duration of a plate impact experiment.