10 GHz Microstrip Spanar Antennas: An Experimental Analysis

2014 International Conference on Science & Engineering in Mathematics, Chemistry and Physics

数学;化学;物理学

Othman, Mohd Azlishah^1 ; Azman, Hazwani^1 ; Husain, Mohd Nor^1 ; Aziz, Mohamad Zoinol Abidin Abd^1 ; Rahim, Yahaya Abd^2 ; Pee, Ahmad Nairn Che^2 ; Motsidi, Mohamad Radzi^2 ; Othman, Mohd Fairuz Iskandar^2

Mohd Azlishah Bin Othman, Microwave Research Group, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia^1

Communication Multimedia Network and Systems Reseach Group, Faculty of Information Technology and Multimedia Communication, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia^2

关键词: Antenna performance;    CST microwave studio;    Experimental analysis;    FR4 substrates;    Microstripes;    Return loss;    Voltage standing wave ratio (VSWR);   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/495/1/012028/pdf
DOI  :  10.1088/1742-6596/495/1/012028

来源: IOP

【 摘 要 】

This paper presents Spanar Antenna designed using CST Microwave Studio Simulation 2011. The proposed antenna was designed to operate at 10 GHz, which suggested return loss, S11must be less than -10 dB and voltage standing wave ratio (VSWR) must be less than 2. The best performance of simulation of Spanar Antenna was obtained at a small size of 24.8 mm × 8.0 mm with dimension board of FR4 substrate 31.7 mm × 18.5 mm. The thickness (h) and dielectric constant (r) of substrate were 1.6 mm and 4.7. An analysis between simulation result and measurement result has been compared in order to see the antenna performance.