Method of researching the influence of isothermic annealing modes on welding of hauling track rails used in mine workings

International Scientific Conference "Knowledge-based technologies in development and utilization of mineral resources"

Shevchenko, R.A.^1 ; Kozyrev, N.A.^1 ; Kutsenko, A.I.^1 ; Usoltsev, A.A.^1 ; Kutsenko, A.A.^1

Siberian State Industrial University, 42 Kirova street, Novokuznetsk

654006, Russia^1

关键词: Mine workings;    Rail steel;    Weld metal;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/206/1/012031/pdf
DOI  :  10.1088/1755-1315/206/1/012031

来源: IOP

【 摘 要 】

Modern problems of butt welding of hauling tracks in mine workings are considered. The article describes the method for studying the influence of isothermal annealing modes of a welded joint of samples from rail steel. The cutoff layout of samples used for experiments and the equipment are provided. The developed method allows the temperature to be measured in the weld metal and the heat-affected zone in the process of welding the samples from rail steel. Using the developed method it is proposed to study the effect of thermal cycles of butt welding on the structure of rail steel. The result of using this method is shown as an example.