The pilot study of sustainable renewable heat energy which generated from an active compressor in a pest control industrial company

2nd International Conference on Eco Engineering Development 2018

生态环境科学

Prawira, Harpa Ega^1 ; Nasution, Januar^2

Environmental Analyst, Indonesia^1

Industrial Engineering Department, Faculty of Engineering, Bina Nusantara University, Jakarta

11480, Indonesia^2

关键词: Carbon foot prints;    Compressor systems;    Continuous heating;    Industrial companies;    Industrial sector;    Lubrication process;    Price-performance;    Renewable energies;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/195/1/012070/pdf
DOI  :  10.1088/1755-1315/195/1/012070

学科分类：环境科学（综合）

来源: IOP

【 摘 要 】

Energy recovery is one of methods to minimize carbon foot print. In addition to that, the increase of the price of energy is unavoidable, these days, including in industrial sectors which makes renewable energy, that offers a friendly price-performance issue, is now taken into consideration. Furthermore, the using of energy recovery is beneficial as it not only reduces energy consumption, but also gives cost saving for the product that are made. In this case, heat energy which generated by the lubrication process of the compressor system was studied to determine how this heat can be captured and be used for heating process. Firstly, the heat from lubrication process is contacted with water through a heat exchanger and connected through piping system as a continuous heating process to increase the temperature of water in a test bath. Secondly, if this idea of energy conservation works, the estimated average energy saving is equal to 33.1% (19.4 kWh). Temperature, time, actual wattage, and the size of the products which are directly affected by the process were collected to determine the best possible way to harvest this heating energy.