Experimental investigation on interaction of wave disk generator with flexible gear

International Conference on Innovations and Prospects of Development of Mining Machinery and Electrical Engineering 2018

矿业工程;电工学

Strelnikov, V.N.^1 ; Sukov, M.G.^2

Belgorod State University of Technology (BSUT), Kostyukov Street 46, Belgorod

308012, Russia^1

Private Joint Stock Company Novokramatorsky Mashinostroitelny Zavod, Ordzhonikidze street 5, Donetsk region Kramatorsk

84305, Ukraine^2

关键词: Design Engineering;    Experimental investigations;    Experimental values;    Heavy engineering;    Interaction of waves;    Resultant forces;    Universal test;    Wave generators;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/194/3/032028/pdf
DOI  :  10.1088/1755-1315/194/3/032028

来源: IOP

【 摘 要 】

Power processes that proceed upon interaction between the flexible gear and the wave disk generator were investigated. Experimental values of the normal load q distribution in an area of the flexible gear contact with the wave generator disks were determined. This load was applied to the flexible gear on the side of the wave generator disks (from the principal axis ψ of the wave gearing) and selected for various torque M2 values being transmitted. Moreover, a dependence of the resultant force R, impressed by the flexible gear to the wave generator disks, on the torque M2 values was determined. An experimental investigation under conditions of the heavy engineering has been scheduled. A wave gearing built in the Type VZ-1120 Gearbox of the MP-600AS torpedo car swivel mechanism was used as the prototype. It was investigated on a universal test stand with an opened power loop. Investigation results obtained in such a way are used in heavy engineering as the guiding data for performance of the development and design engineering works and optimization of the heavy wave gearbox performance.