Study on the Kinetics of Epoxidation Reaction of RBD Palm Olein

International Conference on Industrial Technology for Sustainable Development 2017

工业技术;经济学

Ifa, La^1 ; Syarif, Takdir^1 ; Sabara, Zakir^1 ; Nurjannah, Nurjannah^1 ; Munira, M.^1 ; Aryani, Febri^1

Department of Chemical Engineering, Faculty of Industrial Technology, Universitas Muslim Indonesia, Campus II of UMI Makassar, Jalan Urip Sumoharjo Km 05, Makassar

90232, Indonesia^1

关键词: Epoxidation reactions;    Magnetic stirrers;    Oxiranes;    Palm olein;    Water baths;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/175/1/012035/pdf
DOI  :  10.1088/1755-1315/175/1/012035

学科分类：工业工程学

来源: IOP

【 摘 要 】

This research aimed at studying the effect of reaction time, temperature and the type of catalyst on oxirane number and determining reaction kinetics data. There were two types of catalysts used were bentonite and sulfuric acid (H2SO4). The epoxidation reaction was done in-situ using hydrogen peroxide, acetic acid and benzene with bentonite and H2SO4 into the RBD palm olein to form epoxidized RBD palm olein. The main equipment used in this research was a 500 mL three-necked flask, equipped with a reflux condeser, thermometer, water bath and magnetic stirrer. The product was analysed of % of oxirane using a titration method. The results of this research showd that bentonite catalysts was optimally working at the temperature of 70°C for 4 hours with an oxirane level of 1.02%, while H2SO4 was optimally working at the temperature of 60°C for 3 hours with oxirane level of 2.31%.