The Application of One-Cycle Control Technology in Electric Spring System

2nd International Symposium on Resource Exploration and Environmental Science

生态环境科学

Tang, Niang^1 ; Yang, Kai^2 ; Huang, Hui^1 ; Lee, Chi-Kwan^3

Electric Power Research Institude of Guangdong Power Grid Co. Ltd., Guangzhou, Guangdong

510080, China^1

State Key Laboratory of Power Equipment and System Security and New Technology, Shapingba District, Chongqing

400044, China^2

Department of Electrical and Electronic Engineering, University of Hong Kong, Hong Kong^3

关键词: Accurate tracking;    Complex structure;    MATLAB /simulink;    One cycle control;    Photovoltaic systems;    Sensitive loads;    Strategy system;    Voltage fluctuations;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/170/4/042117/pdf
DOI  :  10.1088/1755-1315/170/4/042117

学科分类：环境科学（综合）

来源: IOP

【 摘 要 】

This paper first introduced the function, application and the control algorithm of the electric spring (ES), then the working principle of ES are explained. Aiming at the problems that the existing control algorithms have complex structures and are not conducive to accurate tracking of AC voltage signals on sensitive loads, this paper proposes the ES control strategy based on one-cycle control (OCC) technology. In Matlab/SimulinK, the ES system based on the OCC strategy is modeled and simulated. Through the waveform analysis, it is known that when the power of the photovoltaic system injected into the power grid fluctuates, the ES based on the OCC strategy system can operate in a capacitive, inductive or resistive mode automatically, which can achieve a direct and accurate tracking of a given AC voltage signal under the condition that a small amount of reactive power is injected into the grid, thus the voltage of the sensitive load is stabilized, and at the same time the voltage fluctuations on the grid side voltage can be transferred to non-sensitive loads in series with the ES.