Carbon Dioxide Minimum Miscibility Pressure with Nanopore Confinement in Tight Oil Reservoirs

8th International Conference on Environment Science and Engineering

生态环境科学

Mohammad, R.S.^1 ; Zhang, S.^1 ; Haq, E.^2 ; Zhao, X.^3 ; Lu, S.^1

Oil and Gas Field Development Engineering Department, China University of Petroleum-Beijing, Changping, China^1

Geological and Geosciences Department, China University of Petroleum-Beijing, Changping, China^2

Centre of Geoscience Computing, School of Earth and Environmental Science, University of Queensland, Brisbane, Australia^3

关键词: Appropriate techniques;    Displacement efficiency;    Laboratory procedures;    Low permeable reservoirs;    Minimum miscibility pressure;    Multiple contacts;    Tigh treservoirs;    Vanishing interfacial tensions;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/167/1/012030/pdf
DOI  :  10.1088/1755-1315/167/1/012030

学科分类：环境科学（综合）

来源: IOP

【 摘 要 】

CO2-injection is one of the capable processes in EOR from low-permeable reservoirs and MMP determination is a key factor in estimating the displacement efficiency of the CO2 in the EOR processes. The laboratory procedures for MMP determination recognized in the oil industry are slim-tube, rising-bubble, or vanishing interfacial tension (VIT). However, the presence of nanopores in tight formations influences phase equilibrium, causing reduction in MMP. Instead, the existing MMP correlations need to be modified for tight reservoirs that might result in reliable MMP. Therefore, MMP measurement is performed using WinProp to validate correlations for tight oil samples. This study presents MMP determination experimentally using VIT for tight oil samples in both recombined-oil and dead-oil conditions. Subsequently, results obtained from VIT are compared with slim-tube results and the relative error was found 4.86% for recombined-oil and 23.36% for dead-oil. A huge deviation between VIT and slim-tube is noted while measuring MMP for dead-oil, due to deficiency of multiple contacts miscibility and stabilization of heavier fractions. subsequently, an already incorporated correlation for MMP is utilized, considering the effect of nanopore confinement. This study provides an appropriate technique for predicting MMP considering the capillary pressure and solubility on well performance of tight reservoirs.