Numerical simulation and experimental research the characteristic at rated guide vane opening on pump-turbine

Asian Working Group- IAHR's Symposium on Hydraulic Machinery and Systems

Liu, D.M.^1,2 ; Zhao, Z.Y.^2 ; Guan, Z.W.^2

State Key Laboratory of Hydro Science and Hydraulic Engineering, Beijing

100084, China^1

DongFang Electric Machinery Co., Ltd, Deyang, Sichuan

618000, China^2

关键词: Characteristic curve;    Experimental research;    Geometry parameter;    Guide vane openings;    Hydraulic performance;    Negative pressures;    Reversible pump-turbine;    Transient process;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/163/1/012013/pdf
DOI  :  10.1088/1755-1315/163/1/012013

来源: IOP

【 摘 要 】

The performance of a reversible pump turbine with S-shaped (dQ11/dn11>0) characteristics is of great harmful to the transient processes such as start-up and load rejection. When working point transition is required, then process in turbine mode must be fast, efficient and reliable. Especially during load rejection, the pressure increasing at spiral case and negative pressure taking place at draft tube. This phenomenon has great relation with the characteristic curve with pronounced S shape. In this paper, the characteristic curve is improved with runner optimization. And hydraulic performance results are compared with runner geometry parameters changing. The runner optimization is an effective method to solve this problem.