Perspective usage estimation of Volga region combustible shale as a power generating fuel alternative

Thermal Methods for Enhanced Oil Recovery: Laboratory Testing, Simulation and Oilfields Applications 2017

Korolev, E.^1 ; Barieva, E.^2 ; Eskin, A.^1

Institute of Geology and Petroleum Technologies, Kazan Federal University, Kazan, Russia^1

Kazan State Power-engineering University, Kazan, Russia^2

关键词: Basic parameters;    Furnace process;    Its efficiencies;    Materials of constructions;    Organic components;    Physicochemical parameters;    Residual components;    X ray fluorescence analysis;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/155/1/012011/pdf
DOI  :  10.1088/1755-1315/155/1/012011

来源: IOP

【 摘 要 】

A comprehensive study of combustible shale, common within Tatarstan and Ulyanovsk region, is carried out. The rocks physicochemical parameters are found to meet the power generating fuels requirements. The predictive estimate of ash products properties of combustible shale burning is held. Minding furnace process technology it is necessary to know mineral and organic components behavior when combustible shale is burnt. Since the first will determine slagging properties of energy raw materials, the second - its calorific value. In consideration of this the main research methods were X-ray, thermal and X-ray fluorescence analyses. Summing up the obtained results, we can draw to the following conclusions: 1. The combustible shale in Tatarstan and the Ulyanovsk region has predominantly low calorific value (Qbd= 5-9 MJ/kg). In order to enhance its efficiency and to reduce cost it is possible to conduct rocks burning together with some other organic or organic mineral power generating fuels. 2. High ash content (Ad= 60-80%) that causes a high external ballast content in shale implies the appropriateness of using this fuel resource next to its exploitation site. The acceptable distance to a consumer will reduce unproductive transportation charges for large ash and moisture masses. 3. The performed fuel ash components characteristics, as well as the yield and volatiles composition allow us to specify the basic parameters for boiler units, designed for the Volga combustible shale burning. 4. The noncombustible residual components composition shows that shale ash can be used in manufacture of materials of construction.