Performance of Nitrogen and Phosphorus Removal in Petrochemical Wastewater by Zeolited Fly Ash

2018 2nd International Workshop on Renewable Energy and Development

能源学;经济学

Li, Zheng^1 ; Gu, Guizhou^1 ; Ji, Shenghao^1

College of Chemistry, Chemical Engineering and Environmental Engineering, Liaoning Shihua University, Liaoning Province Fushun

113001, China^1

关键词: Cation exchange capacities;    Comprehensive utilizations;    Discharge standards;    Hydrothermal methods;    Nitrogen and phosphorus removal;    Petrochemical industry;    Petrochemical wastewater;    Reaction temperature;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/153/2/022020/pdf
DOI  :  10.1088/1755-1315/153/2/022020

来源: IOP

【 摘 要 】

The zeolitized fly ash was synthesized by alkali melt hydrothermal method. The cation exchange capacity of zeolitized fly ash was far greater than the raw material fly ash. The main component was NaP1 zeolite (Na6Al6Si10O32•12H2O), followed by mullite, and a small amount of heterozygous crystals. The effect of synthetic zeolite dosage, pH value, adsorption time and reaction temperature on the effect of nitrogen and phosphorus removal in petrochemical wastewater were investigated. The results showed that when the zeolitized fly ash dosage was 9 g/L, the petrochemical wastewater pH value was 6∼8, adsorption time was 30 min and the reaction temperature was 30°C, the synthetic zeolite had the best effect on the removal of TN and TP in petrochemical wastewater, and the removal was 65.5%, 91.4% respectively. Besides, the concentrations of TN and TP in the effluent were 11.04 mg/L, 0.31 mg/L respectively. The concentrations met the sewage discharge standard in petrochemical industry of »Liaoning sewage comprehensive discharge standard» (DB21 1627-2008). This study was to realize the comprehensive utilization of solid waste and achieve the purpose of waste and waste.